|
Workshop:
Snowplow Safety
October 30, 2007
Winchester, CT
8:30 AM - 12:30 PM, Registration 8:00 AM
| Can’t make it to this workshop...
Then join us at one of the other
upcoming Snowplow Safety
workshops listed below:
|
|
SUMMARY
Participants learn how to safely operate snowplows on
city, suburban, and rural roads. They will also learn proper
preparation, sanding/salting procedures, and defensive
driving techniques.
| Snowplow Safety Safety is one of many practical workshops
CIRMA provides its members. Designed for municipal
employees who have responsibility for snowplowing and
their managers, this workshop teaches the core safety and
risk management skills needed to prevent accidents and
control losses.
For more information about CIRMA Workshops, please email
CIRMA at cirmaregistration@ccm-ct.org.
“Bad weather, poor visibility, icy roads:
all combine to make snowplow operation
a hazardous job.”
|
|
LEARNING OBJECTIVES
Swirling snow, icy roads, and poor visibility make snow
removal one of the most difficult and dangerous jobs performed
by public works departments. When everyday traffic and long
hours behind the wheel are added to the icy mix, snow plow
operators are severely tested.Snow removal is one of the most important safety activities
performed by local governments. Everyone in the community -
especially emergency rescue workers - count on public works
departments to clear roads quickly after winter storms.
This CIRMA workshop provides a thorough introduction to
safe snowplow operation to new snowplow operators. It is also a
good refresher course for experienced members of municipal
agencies. The workshop also discusses the many new technologies
that have been recently developed to improve the safety and
effectiveness of snowplow operations.
Workshop topics include:
- Preparing for a storm
- Snowplow operations
- Defensive driving
- Spreading operations
- New anti-icing techniques
- Cleanup
- Record keeping
- Hands-on equipment review
AUDIENCE
This workshop is designed for:
- Snowplow Operators
- Directors of Public Works
- Highway Superintendents
- Road Foremen
- Fleet Managers
SPEAKERS
Bill Eyberse
Bill Eyberse has over 20 years of experience with the
Connecticut Department of Transportation, serving as a
Maintainer, Qualified Craft Worker Electrician, and seven years
as a trainer. Bill is currently a ConnDOT Planner I. Since 1983,
he has been an instructor for the Eastern Connecticut Fire School
in Windham. His company, Signal 54 Training, is a recognized
Public Training Agency for the National Safety Council.
WHERE
Winchester/Winsted Town Hall
338 Main Street
Winsted, Connecticut 06098
(860) 379-2713
COST per attendee
This seminar is open to CIRMA members only and is free of charge.
DIRECTIONS
From the EAST:
Take Route 44 to center of town. Town Hall will be on the right, 338
Main Street (Route 44).
From the WEST:
Take Route 44 to center of town. Town Hall will be on the left, 338
Main Street (Route 44).
From the SOUTH:
Take Route 8 North to the end and follow Route 44 W to center of
town. Town Hall will be on the right, 338 Main Street (Route 44).
PARKING:
Park on the street or in auxiliary lot behind Town Hall located across
the street from the Town Hall parking lot.
| 
